Energy-saving boiler functions and features

　　Energy-saving boilerThe functions and features of energy-saving boilers demonstrate powerful capabilities in flue gas temperature, equipment energy consumption, and boiler flue gas emission. Additionally, there are unique characteristics. Next, I will introduce the functions and features of energy-saving boilers.

　　Energy-saving boiler: Flue gas temperature and flue gas losses are the main factors affecting the operating efficiency of gas boilers, mainly affected by the flue gas volume and excess air coefficient. Analysis of the combustion principle reveals that the greater the excess air coefficient, the more waste gas, and naturally, the more heat is carried away. Changing the shape of the old glass wool embedded in glass cloth to rock wool embedded in sheet metal can reduce the heat loss rate of the pipe network and improve energy use efficiency. At the same time, the insulation treatment of the softener tank has been strengthened, improving the insulation function of the softener tank and reducing the heat loss of the boiler softened water.

　　Equipment power consumption: Energy-saving boilers consume a large amount of electricity during operation. To reduce the energy consumption of the boiler room, reasonable equipment configuration and the integration of advanced technologies can be adopted. Staff are required to analyze the operation of the boiler room, fully understand the characteristics and performance of each equipment, and calculate the operating flow rate, power, and efficiency of the pumps and fans in the pipe network.

　　Develop an optimization plan to reduce the starting current through reasonable configuration and avoid the impact of excessive energy consumption on the power grid. Staff can use inverters to reduce the AC frequency and simultaneously utilize inverters to reduce boiler energy consumption, improving overall efficiency.

　　Energy-saving boilerBlowdown: While reducing heat loss through regular blowdown, the water quality of the gas boiler can also be regularly checked to ensure that the boiler water quality meets the standards, master the alkalinity and change patterns of the gas boiler water, and reduce pollutant emissions.

　　Reasonable flue gas discharge: Discharge impurities, mud, and scale from the boiler water, control the boiler water alkalinity and salt content, ensure that the boiler water quality meets national standards, maintain the cleanliness of the heating surface, meet the requirements for qualified steam quality, extend the service life of the boiler, and fully utilize flue gas exhaust heat to achieve energy-saving effects.

　　Energy-saving boiler characteristics:

　　1. No smoke or tar is produced during combustion, the fuel can be completely burned, and there is a slight lime residue after combustion. Clean, pollution-free, and healthy.

　　2. Energy-saving boiler: Quick ignition, no electric fan needed, no electricity required, easily ignited with a match, no strict requirements for fuel, free loading, continuous operation, no compression, cooking, heating, and water heating can be done without mutual interference.

　　3. A wide variety of fuels are suitable, including wood, branches, corn stalks, coal, cow and sheep dung, combustible domestic waste, and other combustible materials.

　　4. Convenient operation and use. During use, fuel can be added continuously, once, or according to the amount of fuel added. Similar to the ancient firewood stove method, fuel does not require additional preparation. Since the floor area of the stove is small, it can be used immediately after purchase. It can be arranged freely and is easy to use. It can be used anywhere and the firepower can be adjusted.

　　5. Widely used, suitable for homes, schools, mines, etc. Stir-frying, cooking, bathing, heating, baking for 8 minutes, and then using hot water.

　　The above is an introduction toEnergy-saving boilerContact Us