How to deal with the abnormally short lifespan of an electromagnetic boiler

If used improperly, for example, if the controlled temperature is too high or the temperature is not controlled according to the time interval, and it is operated at high temperature after going to bed at night, it will naturally consume a lot of electricity, so users need to use it reasonably. In order to prevent the high energy consumption of electromagnetic boilers, there are also range issues. If the scale is not cleaned in time or there is no soft water, after a long period of time, a layer of scale will adhere to the main body of the boiler, and the heating efficiency will be greatly reduced. There are three methods for handling electromagnetic heating boilers.

Electromagnetic furnace uses acid cleaning solution for descaling. Most of them are cleaned with hydrochloric acid or nitric acid. Usually, it consists of hydrochloric acid plus corrosion inhibitor or nitric acid plus corrosion inhibitor. The pickling solution has a dissolving effect and a peeling effect. And the loosening effect, not only can eliminate the scale in the boiler, but also rarely corrodes the system. Use mechanical tools to stop descaling. When there is scale and sludge in the boiler, drain the water in the system and rinse with clean water. You can use a flat shovel, wire brush and electric pipe grinder to stop descaling. This method is relatively simple, but the labor intensity is high, the descaling effect is poor, and the electromagnetic boiler is also easy to damage the system.
 
What users care about is also what we care about. The heating center of the electromagnetic heating furnace is completely isolated from water and electricity, so that the water moves inside, while the high-frequency wires are wound outside. Non-metallic anti-corrosion lining is used for insulation and insulation. The entire structure is separated from water and electricity. Each electronic control component is integrated in the control box, and there will never be any safety problems when the water is energized. The electromagnetic heating boiler understands the internal structure of the electromagnetic heating furnace, so you don't have to worry about safety issues.

K盟 Energy (Yangzhou) Co., Ltd.'s main products include: low-nitrogen boilers, condensing boilers, hot water boilers, steam generators, burners, energy-saving boilers, electric boilers, electromagnetic boilers, gas boilers, steam boilers, etc. Products are widely used in power, machinery, textile, metallurgy, petrochemical, photovoltaic and other industrial and mining enterprises, as well as commercial squares, CBD buildings, hotels, apartments and other buildings. Located on the beautiful Yangtze River, the company is a company engaged in the research and development and manufacturing of intelligent energy technology and products. It adheres to the professional development path, focuses on the thermal energy technology industry, and provides safer, more energy-efficient, and more worry-free series of thermal products and system solutions to global users.